Have you ever wondered if the stucco coating on your home is dangerous?
You’re not alone.
I know I’ve wondered about it, and our home has stucco on it. Let me ask you something else.
Do you think it’s a good idea to touch the stucco on your home when it’s wet?
You may have thought so, but many people have found out the hard way that they are wrong. That’s why this article is here today. We want to talk to you about stucco, and what can happen if you touch it when it’s wet. We’ll also talk about what is stucco, how it can be dangerous, and why you shouldn’t touch it when it’s wet.
What Is Stucco?
Stucco is a plaster-like substance that is used on houses, chimneys, and other buildings to make them look more attractive. Stucco is applied over a wood or metal framework, referred to as lath, which is then covered in a mesh. The mesh is then covered with a layer of stucco, which is then painted. Traditional stucco is created using sand, lime, and water that is then applied over the lath.
You can also use cement that is then mixed with sand or other substances to hold it together. Stucco has been used for thousands of years, but it wasn’t until the early 1900s that the process was changed. The new process used Portland cement instead of lime to hold the mixture together. Today, stucco is created using Portland cement, sand, and water.
It is then applied to surfaces that are smooth and made of nonporous material, such as metal or wood. It is especially popular in areas where the weather is hot and humid. Stucco is used on more than just houses. It is also used to cover chimneys, porches, and decks.
Why Is Stucco Dangerous?
Stucco is dangerous because it’s highly alkaline, which means it will burn your skin if you come in contact with it. It’s also very hard to get off of your skin once it attaches.
How to Tell If Your Stucco Is Wet?
You can tell if your stucco is wet if you notice that it’s dripping. You’ll also see water running down the wall, and it may appear shiny, especially if it’s hot outside. You’ll know for sure if it’s wet if you touch it and it feels wet. If it is wet, that means that the Portland cement in the mixture is still curing. That means that it’s likely that someone just painted your house or touched up the stucco in some way.
The Top 5 Most Common Reasons Stucco Can Fail:
Stucco is a popular exterior building material, but it’s not as indestructible as its popularity might suggest. Although stucco is a popular exterior building material, it’s not as indestructible as its popularity might suggest. Many stucco houses end up having problems with the stucco finish, which can eventually lead to the failure of the entire structure.
Top five most common reasons stucco can fail.
1. Moisture and water damage
Water and moisture can be a serious issue for stucco, and it’s the cause of many problems – both structural and cosmetic – in houses and other buildings. If moisture and water damage occur, the stucco often starts to peel away, and holes and cracks appear in the walls. Problems with moisture and water damage are usually caused by improper ventilation, poor drainage, and/or blocked gutters and downspouts.
2. Poor quality materials and workmanship
Many stucco problems are caused by shoddy workmanship and inferior materials. For example, if you’re using a low-quality stucco product, it might not be able to withstand the elements and might start to fail.
3. Insects and pests
Stucco is a popular material for homes because it’s durable, easy to work with, and has a high aesthetic value. However, these qualities also make it a prime target for many pests and insects. In the worst-case scenario, the insects and pests can end up damaging the stucco itself.
4. Fire and natural disasters
Fire and other natural disasters can also cause a lot of structural damage to a stucco home. Additionally, if your home isn’t built correctly, a fire or natural disaster could even spread inside the house.
5. Ineffective stucco coatings
Finally, if your stucco house has been properly maintained, it should have a protective coating, such as an algae shield. The coating should repel water and moisture to help prevent structural damage. In many cases, however, this protective coating won’t be as effective as it should be.
